HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Indicates whether a THP pool can be configured by mixing internal and external
volumes.
One of the following values is output:
• enable
• disable
externalMixCompat-
ible
PoolTier instance
The PoolTier instance is output when the following commands are executed:
• “AddPool” on page 65
• “GetStorageArray (subtarget=Pool) ” on page 149
• “ModifyPool” on page 170
Table 129 PoolTier instance attributes
DescriptionAttribute
Object ID of the hardware tier
objectID
Name of the hardware tier
name
ID of the hardware tier
tierID
Capacity of the hardware tier (KB)
This value does not match the total capacity of the pool volumes for Smart Tiers
because the pool of Smart Tiers uses a control area.
capacityInKB
Unused capacity of the hardware tier (KB)
freeCapacityInKB
Usage rate of the hardware tier
usageRate
RAID level (example: RAID6 or RAID1+0)raidLevel
Combination of data drives and parity drives in a RAID configuration.
This item is output as xD+yP or as xD+xD.
• xD: Number of data drives
• yP: Number of parity drives
Unknown is output if the combination is unknown.
combination
Drive revolutions per minute
rpm
Type of the drive
One of the following values is output:
• -1: Unknown
• 1: SATA
• 4: SAS
• 5: SSD
diskType
CLI Reference Guide 315