HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

Parameters
Table 19 AddExternalArrayGroup command parameters
DescriptionStatusParameter name
Serial number of the storage system where you want to create
the external parity group
Required
serialnum
Model of the storage system where you want to create the external
parity group
Required
model
Group number of the external parity group
Specify the group number of the external parity group to be
created.
You can specify an integer from 1 to 16384.
If this parameter is omitted, a value is automatically set by Device
Manager.
Optional
externalgrpnum
Port name of the port to which the external storage system is
connected
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
portname
Port WWN of the external storage system
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
externalwwn
LUN of the external volume
If you specify multiple (alternate) paths, use a comma to separate
each entry.
When specifying paths, the parameters portname,
externalwwn, and externallun must all be specified as a
set. The order in which they are specified dictates the path priority.
(The first parameter in the set will become the primary path.)
Make sure that the order and number of the values specified for
these parameters are correct.
Required
externallun
Group number of the path
If this parameter is omitted, a value is automatically set by Device
Manager.
Optional
pathgroupid
CLI Reference Guide 43