HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
The port ID of the host storage domain to delete
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
port
Port name for the host storage domain to delete
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
portname
The domain ID of the host storage domain to delete
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
Do not specify 0. A host storage domain whose domain ID is 0
cannot be deleted.
You must specify either domain or domainnickname. Do not
specify both parameters at the same time. If they are specified at
the same time, an error will occur.
Optional
domain
Nickname of the host storage domain to delete
You must specify either domain or domainnickname. Do not
specify both parameters at the same time. If they are specified at
the same time, an error will occur.
Optional
domainnickname
For this parameter, you can specify only lusekeep.
If this parameter is omitted, a LUSE is deleted. If you do not want
to delete a LUSE, be sure to specify this parameter.
Optional
deletionoption
Parameter values to obtain in advance
serialnum and model: Obtain these values from the execution result of the GetStorageArray
command. In the execution result, use the arrayType value or the displayArrayType value to
specify the model parameter, and use the serialNumber value to specify the serialnum parameter.
domain and port: Obtain these values from the execution result of the GetStorageArray
(subtarget=HostStorageDomain) command. Execute this command by specifying only the model
and serialnum parameters, and HostStorageDomain for the subtarget parameter. In the
execution result of this command, the domainID and portID values appear under An instance
of HostStorageDomain. Use these domainID and portID values to specify the domain and
port parameters respectively.
portname: Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command. In the execution result of this command, the displayName value appears under An
instance of Port. Use this value to specify the portname parameter.
domainnickname: Obtain this value from the execution result of the GetStorageArray
(subtarget=HostStorageDomain) command. Execute this command by specifying only the model
and serialnum parameters, and HostStorageDomain for the subtarget parameter. In the
execution result of this command, the nickname value appears under An instance of
HostStorageDomain. Use this value to specify the domainnickname parameter.
Device Manager CLI command reference86