HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

Device Manager server properties
198
8-2-32 server.mail.enabled
This property determines whether to report an alert that has occurred in a storage subsystem to the
user by email. To enable the email notification function, set this property to true.
Default: true
8-2-33 server.mail.from
This property changes the mail address of the notification source (sender). If no value is specified or
the specified value is invalid, the default value is set.
Default: hdvmserver
8-2-34 server.mail.smtp.host
This property specifies the host name or IP address of the SMTP server to be accessed when an
email is sent by the email notification function of the Device Manager server. The IP address can be
specified in IPv4 or IPv6 format. You must specify this property.
CAUTION: If you do not specify this property, the email notification function will not be enabled
even if you specify true for the server.mail.enabled property.
Default: None
8-2-35 server.mail.smtp.port
This property specifies the port number of the SMTP server to be accessed when an email is sent
by the email notification function of the Device Manager server. You must specify this property.
Specifiable range: 0 to 65535.
Default: 25
8-2-36 server.mail.smtp.auth
This property specifies whether to use SMTP authentication when an email is sent by the email
notification function of the Device Manager server. To use SMTP authentication, set this property to
true. To not use SMTP authentication, set this property to false. Specifying this property is
optional.
Default: false
8-2-37 server.mail.alert.type
This property specifies the type of alerts to be reported by the email notification function of the
Device Manager server. The following values can be specified:
Trap: Reports only SNMP trap alerts.
Server: Reports only the alerts detected by the background threads responsible for checking
component status and the configuration version.
All: Reports both SNMP trap alerts and the alerts detected by the background threads responsible
for checking component status and the configuration version.
NOTE: If All is set, alerts are reported from both SNMP and the server even if these alerts refer
to the same error information.
Default: Trap