HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

Introduction to XP Command View AE Device
Manager
25
IMPORTANT: Do not use DHCP (Dynamic Host Configuration Protocol) if you use Device
Manager to manage the storage subsystem.
XP12000, XP10000, and SVS200 only:
The following table lists the prerequisite firmware versions and software products for using the
Device Manager to manage XP12000 and XP10000 disk arrays, and the HP 200 Storage
Virtualization System.
Table 1-3 Prerequisite firmware versions and software for XP12000, XP10000, and
SVS200
Prerequisite firmware versions Prerequisite software products
• SVP microcode : 50-07-69-00/00 or later
• Controller microcode to use the XP
Disk/Cache Partition view function:
50-03-xx-xx/xx or later
• Controller microcode to use the XP
Continuous Access Journal Software view
function:
50-03-xx-xx/xx or later
• Controller microcode to use the XP
Continuous Access Journal Software setup
function:
50-05-37-xx/xx or later
• Controller microcode to use XP External
Storage Software to view the setting status of
a remote command device:
50-07-00-xx/xx or later
• Controller microcode to use 3DC functionality:
50-08-00-xx/xx or later
• Controller microcode to use the function that
allows LU creation and LU formatting to be
performed separately:
50-09-00-xx/xx or later
• Controller microcode to use the function for
acquiring the status of an LDEV:
50-09-00-xx/xx or later
• Controller microcode to use the performance
information acquisition feature:
50-09-34-xx/xx or later
• Java API
• HP SNMP API
• XP LUN Manager
To use functions for creating a LUSE or LDEV
(CVS):
• Open Volume Management
To use copy pair functionality:
• HP StorageWorks XP Business Copy
Software
• HP StorageWorks XP Continuous Access
Synchronous Software
• HP StorageWorks XP Continuous Access
Asynchronous Software
• HP StorageWorks XP Continuous Access
Journal Software
• HP StorageWorks XP Snapshot
To use Physical View:
• HP StorageWorks XP Remote Web Console
To link with NAS Manager:
• NAS Blade Manager
To use external storage:
• HP StorageWorks XP External Storage
Software
To use storage logical partitioning (SLPR) or
cache logical partitioning (CLPR):
• HP StorageWorks XP Disk/Cache Partition
NOTE: If you use the Device Manager to directly manage storage logical partitions, you need a
separate Device Manager server for each partition. If you use the Device Manager to link and
launch XP Remote Web Console, you can use a single server to manage a partitioned disk array.
• If you use XP Continuous Access Software or XP Business Copy Software, see Chapter 6 for
the requirements.