HP Compaq nc4400 Notebook PC - Maintenance and Service Guide

5–34 Maintenance and Service Guide
Removal and Replacement Procedures
5.15 Display Assembly
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the keyboard cover (Section 5.8).
3. Remove the keyboard (Section 5.9).
4. Close the computer.
5. Turn the computer upside down with the rear panel
toward you.
6. Remove the two Torx8 T8M2.0×20.0 screws 1 that secure
the base enclosure cover to the computer.
7. Remove the two Torx8 T8M2.0×10.0 screws 2 that secure
the display assembly to the computer.
Removing the Display Assembly Screws
Display Assembly Spare Part Number Information
12.1-inch, XGA, TFT display assembly (includes wireless
antenna transceivers and cables, microphone, fingerprint
reader board, and display cable)
419155-001