Reference Guide ProtectTools Security Manager

2–4 Reference Guide
Smart Card Security for ProtectTools
Enabling smart card BIOS security mode
and setting the smart card administrator
password
To enable smart card BIOS security mode and set the smart card
administrator password:
1. Select Start > All Programs > HP ProtectTools Security
Manager.
2. In the left pane, select Smart Card Security, and then
select BIOS.
3. In the right pane, under BIOS Security Mode, click Enable.
4. Click Next.
5. Enter the Computer Setup setup password at the prompt, and
click Next.
6. Insert the new administrator smart card, and follow the
on-screen instructions. The instructions vary and may include
the following tasks:
❏ Initializing the smart card. Refer to “Initializing the smart
card” for detailed instructions.
❏ Setting the smart card administrator password. Refer to
“Storing the administrator or user card password” for
detailed instructions.
❏ Creating a recovery file. Refer to “Creating a recovery
file” for detailed instructions.