HP Integrity Virtual Server Manager 6.3 User Guide
Figure 54 Integrity Virtual Server Manager Tools menu
Table 9 describes the Tools menu options and where to obtain more information in this manual.
More detailed information is provided by the Integrity Virtual Server Manager help.
Table 9 Integrity Virtual Server Manager Tools menu options
More InformationAction SummaryMenu Selection
“Starting VMs” (page 93).
nl
This menu is enabled only for VMs.Tools→Start VM...
“Stopping VMs” (page 94).
nl
This menu is enabled only for VMs.Tools→Stop Virtual Machine...
“Restarting VMs” (page 95).
nl
This menu is enabled only for VMs.Tools→Restart Virtual Machine...
“Suspending VMs” (page 101).
nl
This menu is enabled only for VMs.Tools→Suspend Virtual Machine...
“Resuming VMs” (page 102).
nl
This menu is enabled only for VMs.Tools→Resume Virtual Machine...
“Booting vPars” (page 118)Boots a vPar starting up the hardware
for the vPar, taking it from an Off state
(powered off) to an On state (powered
on).
Tools→Boot Virtual Partition...
“Stopping vPars” (page 119)Stops a vPar, taking it from an On
state (powered on) to an Off state
(powered off).
Tools→Stop Virtual Partition...
“Resetting vPars” (page 120)Restarts an already started vPar,
taking it first to an Off state (powered
off) and then to an On state (powered
on). Starts a stopped vPar.
Tools→Reset Virtual Partition...
“Starting, stopping, and deleting virtual
switches” (page 107)
Starts a virtual switch, taking it from a
Down state (powered off) to an Up
state (powered on).
Tools→Start Virtual Switch...
76 Using Integrity Virtual Server Manager menus