HP Installation Guide, HP AT094A PCIe 2P 8Gb FC and 2P 1/10GbE Adapter, Edition 2

4 Specifications
Cable specifications
Table 3 Cable specifications
Maximum cable
length (meters)
Minimum
modal
Cable grade
Core size
(microns µm)
Wavelength
(nm), type of
cable
Cable
connector type
SFP+ module
type
bandwidth
(MHz-km)
26160(“FDDI”)62.5850,
Multi-Mode
Fiber (MMF)
LC10GBASE-SR
(short range)
Optical
Module
33
66
200
400
OM162.5
50
82500OM250
3002000OM350
7N/AN/A24 to 28 AWG,
depending on
N/A, Twin
Axial Copper
SFP+10GBASE-CR
with Direct
length and
manufacturer
Attached
Copper (DAC)
cable
100100Cat524 AWGN/A, CopperLC/ SFP+ RJ451000Base-T
with SFP+ RJ45
100100Cat5e
100250Cat6
General specifications
Table 4 General specifications
ValueGeneral specifications
Standard height, half lengthForm factor
10.67 cm x 16.7 cm x 2.16 cm (4.2 in x 6.6 in x 0.85 in)Dimensions (H x L x W)
0.181 kg (0.4 lb)Weight
Two fully independent 10Gbps Ethernet FC links delivering 20Gbps Full duplex
per port
Data rate
LC – 10GbEConnector type
LC – 8GbE
Compliance
Table 5 Compliance
StandardCompliance
IEEE802.3x, IEEE802.3ad, IEEE802.1p, IEEE802.1q, IEEE802.3az,
IEEE802.3ae, IEEE802.3ap, IEEE802.1qau
IEEE
UL Mark (US and Canada)Safety
EN 60950
PCIe v2.0Other
RoHS 6 of 6
IPv4, IPv6
Cable specifications 15