HP Installation Guide, HP PCIe 2 port (AT111A/CN1100E) FlexFabric Adapter, Edition 2

Ethernet
Install all driver software and dependency patches before you install the adapter. See the
10GigEthr-03 (iocxgbe) Ethernet Driver for HP-UX Release Notes for further details, available at:
http://www.hp.com/go/hpux-11iv3-iocards-manuals
Ethernet
The following table lists the Ethernet adapter software bundles:
Table 2 Ethernet Adapter Bundle and Product Names
DriverSoftware nameSoftware bundleOS versionAdapter
iocxgbeIOCXGBE-DRV10GigEthr-0311i v3 onlyAT111A
Fibre Channel
The following table lists the Fibre Channel adapter software bundles:
Table 3 Fibre Channel Adapter Bundle and Product Names
DriverSoftware nameSoftware bundleOS versionAdapter
fcocFC-FCOCFibrChanl-0311i v3 onlyAT111A
Use the following procedure to load the drivers from a CD-ROM:
1. Log in to the system as root.
2. Insert the CD into the CD drive.
3. Mount the CD using the following command:
mount /dev/dsk/<cd_rom_dev_file> /<tmp_mnt>
4. Run swinstall to install the software. Enter the following command:
/usr/sbin/swinstall
The Software Selection window and the Specify Source window open.
5. In the Specify Source window, change the Source Host Name if necessary. Enter the mount
point of the drive in the Source Depot Path field and click OK to return to the Software Selection
Window.
Click Help to get more information.
6. Select the appropriate software bundles for your adapter.
7. Select Mark for Install from the Actions menu.
8. Select Install from the Actions menu. Installation begins and the Install Analysis window opens.
9. Click OK in the Install Analysis window to confirm that you want to install the software. The
Install window opens.
View the Install window to read processing data while the software installs. When the Status
field indicates Ready, the Confirmation window opens
10. Click OK. A second Confirmation window opens.
11. Click OK again. The Install window opens.
12. Click Done. The Note window opens.
13. Click OK in the Note window to reboot. The user interface disappears and the system reboots.
14. Once the system returns to a login, log in as root and open the following files to see any
error or warning messages that may have occurred during the installation:
/var/adm/sw/swagent.log
/var/adm/sw/swinstall.log
Installing driver software 13