HP Installation Guide, HP PCIe 2 port (AT111A/CN1100E) FlexFabric Adapter, Edition 2

1 Introduction
Overview
The HP PCIe 2 port (CN1100E) FlexFabric Adapter is a dual port 10GbE adapter for HP Integrity
systems. The HP Product number is AT111A. The CN1100E provides Ethernet and Fibre Channel
(FC) connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE) and Converged
Enhanced Ethernet (CEE) standards. For more information about the HP PCIe 2 port (CN1100E)
FlexFabric Adapter, see the following HP website: http://h18000.www1.hp.com/products/
quickspecs/13554_na/13554_na.pdf
NOTE: Not all operating systems support all protocols.
CNA LED states
You can observe green and amber LEDs through openings in the CNA mounting bracket. See
Figure 1 (page 5). Table 1 (page 5) describes the CNA LED link states.
NOTE: When power is applied to the CNA, both LEDs on both ports light for approximately 10
seconds.
Figure 1 CNA LED indicators
Table 1 CNA LED descriptions
MeaningLED
Flash = activityLink activity (Green)
Off = no activity
On = link upLink state (Amber)
Off = link down
Overview 5