HP D2600/D2700 Disk Enclosure I/O Module Firmware 0147 Release Notes HP Part Number: 504224-008 Published: October 2012 Edition: 8
© Copyright 2009, 2012 Hewlett-Packard Development Company, L.P.
Version: 0147 Description The I/O module firmware included in this package corrects a fan speed issue found during qualification testing. Update recommendation nl • In server-attached environments: Recommended (See Prerequisites for conditions.
Operating system Version SUSE LINUX Enterprise Server 10—x86, AMD64/EM64T SUSE LINUX Enterprise Server 11—x86, AMD64/EM64T NOTE: Support for additional operating systems may be approved after initial release of this firmware. For up-to-date, detailed operating system support information and known restrictions, see one of the following: • HP Storage Single Point Of Connectivity Knowledge (SPOCK) website (http://www.hp.com/storage/spock) • HP D2000 QuickSpecs, available on the D2000 website (http://www.hp.
Installation instructions for server-connect environments The following methods can be used to install new firmware in server-connect environments, such as when the D2600 or D2700 disk enclosure is connected to a Smart Array controller installed in the server: • “Installing firmware using Smart Components in Windows environments” (page 5) • “Installing firmware using Smart Components in Linux environments” (page 5) • “Special installation procedures for single-domain environments” (page 5) Installing
1. Flash I/O module A of the first and all cascaded disk enclosures using the firmware upgrade executable. NOTE: When disk enclosures are cascaded, I/O module A of one enclosure is connected to I/O module A of the subsequent enclosure. During a firmware update, I/O module A in the cascaded disk enclosures is automatically updated. 2. 3. 4. After I/O module A is flashed successfully in the disk enclosures, shut down and turn off the server. Remove A/C power to the first and all cascaded disk enclosures.
CLI option 1. Execute the Smart Component by entering: CPxxxxxxx.exe /target /user /passwd /s Where: CPxxxxxxx.exe is the name of the downloaded firmware file ip_address is the management IP address of the array controller username is the username account with management rights password is the password for username 2. When prompted for logon information, enter credentials for an account with management access rights.
4. Log in to the SMU and, from the Configuration View panel, right-click the system and select Tools > Update Firmware. A table displays currently installed firmware versions. 5. 6. 7. Click Browse, navigate to the temporary directory containing the downloaded firmware file, and select the firmware file to install. Click Install Controller-Module Firmware File.
Supersedes history Firmware Version Release date 0147 October 2012 0146 August 2012 0131 June 2011 0103 October 2010 0102 September 2010 0070 May 2010 0052 November 2009 0038 June 2009 Effective date October 2012 Supersedes history 9
