HP StorageWorks D2D Backup System Instructions for Installing Disks in a Replacement (EH923-90902, September 2007)

Installing a replacement HP D2D Backup System12
Installing an HBA and tape drive
1. If you removed an HBA, re-install it now. The HBA is required if you wish to connect to an
internal or external tape drive. It is always installed in the top PCI slot.
1. Undo the retaining screw on the PCI slot cover retainer on the replacement HP D2D Backup
System.
2. Remove the slot cover retainer.
Figure 11 Removing the slot cover retainer