HP StorageWorks D2D Backup System Instructions for Installing Disks in a Replacement (EH923-90902, September 2007)

Installing a replacement HP D2D Backup System8
Removing the tape drive and HBA (optional)
If you have connected a tape drive to the HP D2D, you must also remove the HBA and disconnect
the tape drive.
1. If the drive is an external model, you have already disconnected the cables before removing the
access panel.
2. Internal tape drives must be removed from the HP D2D Backup System.
1. Release the catch on the device bay and slide the tape drive out.
2. Disconnect the cables.
Figure 5 Removing an internal tape drive (example shows a SCSI tape drive)
3. Observing normal anti-static precautions, remove the HBA. (This must be done for both internal
and external tape drives.)
1. Undo the retaining screw on the PCI slot cover retainer.