HP StoreOnce 4900 (44TB) and (60TB) Capacity Expansion guide

3. Having determined what disks are already installed, use the label on the disk enclosure to
determine which drawer in the disk enclosure should be populated with the set of additional
11 disks. See (page 8). In our example, we have established that this is Expansion #1, so
the additional disks will go into drawer 2.
4. Open the hard drive drawer for drawer 2. Pull the handle up (1) and out (2) to extend the
drawer (3).
Figure 7 Opening the disk drawer
To install the drives 11