HP StoreOnce 4900 (44TB) and (60TB) Capacity Expansion guide

4 Applying the License and Completing the RAID Expansion
IMPORTANT: Please note that there is a different license for the HP StoreOnce 44TB and the HP
StoreOnce 60TB Capacity Expansion. When adding expansion 1 through 5 for each enclosure,
the 44TB license is required. When adding the second disk enclosure, the 60TB license is required.
Obtaining the license
The Capacity Expansion Kit includes a license entitlement certificate. This is a paper document that
contains all the information you need to obtain your unique LTU (License to Use) key. If you have
Internet access, you can obtain the key from the HP Webware site by connecting to the web address
specified on the certificate and following the instructions on the web. (Users without Internet access
may use the contact numbers provided with the entitlement certificate.)
Applying the LTUs can only be performed by an Administrator using StoreOnce CLI commands;
see the HP StoreOnce CLI Reference Guide for more information.
1. In order to obtain your license you will need to provide the Serial Number of your HP StoreOnce
Backup system. This can be found on the HP StoreOnce page of the User Interface under
System Information.
2. Obtain the unique LTU key as instructed on the License Entitlement Certificate. This is normally
from the HP Licensing website at http://www.webware.hp.com. HP recommends that you
select the option to save the license to a .DAT file. The file can also be emailed to the registered
license owner's email address or you can use Cut and Paste to copy it to a temporary file.
Obtaining the license 19