HP B6000 Capacity Upgrade Booklet (EJ022-90938, June 2012)

license add <string> to key in the license
directly. If you used email or a temporary file, cut
and paste the string exactly as you obtained it
from the HP Licensing website. It is not advised
to try and key in the LTU manually.
4. The key is specific to the HP StoreOnce Backup
System couplet to which it applies. It cannot be
transferred.
Discovering and Adding the New Storage
NOTE: HP recommends discovering and
adding the storage during a quiet period of
backups and replication because performance
will be slower during this time.
After you have installed and cabled the capacity
upgrade kit, you must use the following CLI commands
to discover and add the new storage to your system.
The storage is not available until you perform the
following commands:
• hardware discover storage
• hardware add storage
You can periodically check the progress of the add
storageprocess using the CLI command system show
status.
See the HP StoreOnce Backup System CLI Reference
Guide for more information on these commands.
After these commands are executed, the appliance
will be online and ready to accept backups. However,
you may not see the additional storage immediately.
This could take anywhere from one to four hours
depending on how much additional storage has been
added and how busy the system is during this time.
Related Information
HP StoreOnce B6000 Backup System documentation:
• HP StoreOnce B6000 Installation Planning and
Preparation Guide
• HP StoreOnce B6000 Backup System User Guide
• HP StoreOnce B6000 Backup System CLI
Reference Guide
• HP StoreOnce B6000 Backup System
Recommended Configuration Guidelines
• HP StoreOnce B6000 Software Release Notes
HP Websites
For additional information, see the following HP
websites:
• http://www.hp.com/go/storeonce
• http://www.hp.com
• http://www.hp.com/go/storage
• http://www.hp.com/support/manuals
HP Technical Support
For worldwide technical support information, see the
HP support website: http://www.hp.com/support
Before contacting HP, collect the following information:
• Product model names and numbers
• Technical support registration number (if
applicable)
• Product serial numbers
• Error messages
• Operating system type and revision level
• Detailed questions
6