HP StoreOnce B6200 Installation Planning and Preparation Guide (EJ022-90995, November 2013)

Fibre Channel

If you are not using VTL for backup, please ignore this section.

You have the correct number of physical FC connections; 8 per couplet.

NOTE: StoreOnce software prior to v3.9.0 only supports four FC connections per couplet.

Fibre Channel is configured correctly for Virtual Tape Libraries (VTL) and the configuration supports

failover. See Fibre Channel connection (page 22).

Miscellaneous

If NTP, email and SNMP requirements are specified prior to installation, the HP service specialist

may be able to help you configure your system.

NTP is recommended for time synchronization, for example when replicating data.1.

1. Do you want NTP server connection?................................................................................

2. What is the IP address of the NTP server(s)?.......................................................................

(Up to two NTP servers are supported)...............................................................................

2. 1. Should email alerts be configured?.....................................................................................

2. Who should receive the emails?.........................................................................................

(Provide a list of email addresses and what they should receive, i.e. Information / Warning /

Alert)

.............................................................................................................

3. SMTP server details......................................................................................

Should SNMP be set up to management software, such as HPSIM or HP Insight Remote Support

Software.

NOTE: HP strongly recommends that you sign up for the free HP Remote Insight Remote Support

service. For more information go to the IRS Remote Support web page at:

http://h18004.www1.hp.com/products/servers/management/insight-remote-support/overview.html

Please provide configuration settings

1. IP address of SNMP management server................................................................................

2. TRAP targets......................................................................................................................

(Provide a list)....................................................................................................................

3. Community strings..............................................................................................................

(Provide a list)....................................................................................................................

30 Checklists for completion prior to installation