HP StoreOnce Enterprise Manager User Guide

3. You can specify the group name with the devicelist command in the following format:
show devicelist –g <group name>
For example:
show devicelist –g Un-Grouped
Viewing the device summary
You can view the summary report for a specific device and group. The summary report provides
an overview of any current issues with the device in that group. The screen shots are for Gen2
devices unless stated otherwise.
1. At the command prompt, enter the following command:
show devicesummary
The client displays the groups that you own.
2. Enter the appropriate group number or group name of the device.
The client displays the list of devices for the selected group.
3. Enter the appropriate device number or device serial number from the list.
The device summary report displays the following information for the device in the selected
group:
• Current status of the device
• Status of the service sets (B6000-series and above)
• Status of any virtual libraries on the device
• Status of any NAS shares on the device
• Amount of used and free space on the disk
• Deduplication ratio
• Amount of stored user data
Gen2 and Gen3, single node
Viewing the device summary 121