HP StoreOnce Enterprise Manager User Guide

NOTE: After adding a device for an HP StoreOnce device with firmware 3.6.0 or later, you
must enter the user ID and password as authentication.
NOTE: Device additions can be completed by using a file or a Fully Qualified Domain Name
(FQDN) of the StoreOnce IP address also. By using a file, you can add several StoreOnce
devices all at once. To add by files, select Get IP address From File, and click the ... button to
select the file containing IP addresses. To use the FQDN, select Fully Qualified Domain Name.
If you select the option to add a device with its FQDN, ensure the /etc/hosts file in the
host system (HP StoreOnce Enterprise Manager) displays the entry for FQDN of the device to
be added.
If you select the option to get IP addresses from a file, you must create a .txt file with the
IPs of all the devices to be added. The authentication for the devices to be added should be
provided only once.
4. Select the appropriate polling interval from the Polling Interval field.
The polling interval indicates how often the device is surveyed by the HP StoreOnce Enterprise
Manager to determine and record or report its status.
5. Select or clear the box to indicate whether the system is to find the associated target and
source devices.
If this box is selected, the HP StoreOnce Enterprise Manager searches for any target and
source devices connected to the device being added, and also adds them to the system.
6. Select or clear the box to indicate whether the system is to search in the background.
If Search in Background is selected, other operations can be performed while devices are
being added.
If Search in Background is not selected, the Progress Bar window appears until the devices
are added successfully (or if the operation fails). Other operations cannot be performed while
the devices are being added.
14 Configuring the HP StoreOnce Enterprise Manager