HP D6000 Disk Enclosure Installation Instructions

3. Slide the front end of the rail to the rack front column. When fully seated, the
rack rail will lock into place.
4. Repeat the procedure for the right rack rail.
WARNING: The enclosure is very heavy. To reduce the risk
of personal injury or damage to the equipment:
• Observe local occupational health and safety
requirements and guidelines for manual material
handling.
• Remove all installed enclosure components from their
enclosures before installing or moving the enclosures.
• Use caution and get help to lift and stabilize enclosures
during installation or removal, especially when the
enclosure is not fastened to the rack.
WARNING: Always use at least two people to lift an
enclosure into the rack. If the enclosure is being loaded into
the rack above chest level, a third person must assist with
aligning the enclosure with the rails while the other two
people support the weight of the enclosure.