HP DDS/DAT tape drives UNIX, Linux and OpenVMS configuration guide (DW049-90930, May 2010)

2. Enter the following, replacing gka401 with the changer device file you found in step 1:
$ mcr sysman io connect gka401: /driver=sys$gkdriver.exe/noadapter
$ define/system mru_robot gka401
To maintain these changes across reboots, edit the sys$startup_vms.com file to include these
two lines.
Verifying the configuration of an autoloader on OpenVMS and
MRU
To verify the configuration, enter the following MRU command:
$ robot show robot gka401
Robot Name: gka401 Type: SCSI
Media Robot Identifier: HP DAT Autoloader 1.00
Slots: 10
Drives: 1
Inports: 0
Outports: 0
Transports: 1
For further details on MRU and using the robot commands, see the MRU User Guide.
What next?
Once the device files have been created, you should confirm that your new tape drive is working
properly. “Verifying the installation” on page 39 provides instructions on backing up and restoring
a sample file to test your installation.
HP (OpenVMS) servers and workstations18