HP StorageWorks DAT USB Tape Drives User Guide (DW049-90916, June 2010)

Secure the drive
1. Secure the drive, as described in your server documentation. The following diagrams are examples
only.
2. server latch, push down to lock the tape drive
into position
1. plastic rail
Figure 12 Securing drive example 1, mounting hardware used
.
1. M3 screws, supplied with tape drive
Figure 13 Securing drive example 2, no mounting hardware used
.
2. Ensure blanking plates are in place over empty bays and replace the cover on the server.
Installing an internal DAT tape drive30