Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

Web Tools Administrator’s Guide 81
53-1001194-01
Port management overview
5
FIGURE 42 Port Administration window, FC Ports, Advanced Mode
Admin Domain considerations
In fabrics with user-defined Admin Domains, the Port Administration window is filtered to
show only ports that are direct or indirect members of the currently selected Admin Domain.
• Direct members are ports that were directly added to the Admin Domain as members.
• Indirect members are:
- non-owned ports on a member switch
- non-owned ports to which member devices are attached
• All active ports, as well as any inactive EX_Ports are shown.
Port Administration window components
The Port Administration window (shown in Figure 41) has the following Two tabs on the top
left:
• FC Ports to display all of the FC ports on the switch (physical FC ports and logical FCIP
ports)
• GigE Ports to display all of the GbE ports, click the GigEPorts tab.
If the switch does not have GbE ports, the GigE Ports tab does not appear.