Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

104 Web Tools Administrator’s Guide

53-1001194-01

Creating and populating domains

5. In the State area. select the Active check box to activate the Admin Domain when you finish

creating it. This is the default setting.

Clear the Active check box if you want the Admin Domain deactivated when you finish creating

it.

6. Click Next.

7. I n th e Membership area, assign members to the Admin Domain by selecting them in the

Available Members section and clicking Add, Add Ports, or Add Devices.

• Select a switch, port, or device in the Available Members tree and click Add to add the

selected element.

Alternatively, you can press the Insert key to add your selections.

• Select a switch or slot and click Add Ports to add all of the ports in the selected switch or

slot.

• Select a switch, slot, or port and click Add Devices to add all of the devices for the selected

element.

Optional: Click Manual to add offline devices.

NOTE

To add ports or other switches in the fabric, you must do it from the Manual button, which launches

the Add Member wizard.

FIGURE 53 Adding members to an Admin Domain

NOTE

The tree only displays two FC ports and all logical ports if the 7500E upgrade license is not

installed.

8. Click Next.