Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

126 Web Tools Administrator’s Guide
53-1001194-01
Advanced performance monitoring graphs
8
FIGURE 65 Creating an SID/DID performance graph
NOTE
Only the FC ports of the launched switch display in the tree. The All Devices tab lists all the
devices in the fabric and lets you select the source and destination. Slot and port information
of other switches is not displayed in the tree.
3. Click a port from the Slot/Port or Sid/Did Selection List.
a. Drag the selected port into the Enter/drag slot, port number field.
b. Click Retrieve preset EE monitors.
The current end-to-end monitors for that port are displayed in the “Current EE monitors set
for selected port table.
c. Optional: To display a performance graph for the current EE monitors set for the selected
port, click a SID-DID pair in the table. You can select multiple Source ID and Destination
IDs. Click Select. If you selected multiple SID/DID monitors, click OK in the confirmation
dialog box that appears. Skip to step 6. If you do not want to display a performance graph
for the current EE monitors set for the selected port, continue with step 4.
4. Click a source ID from the Port or Sid/Did Selection List, and click Add Sid. You can also type a
source ID in the Enter/drag SID number field.
5. Click a destination ID from the Port or Sid/Did Selection List, and click Add Did. You can also
type a destination ID in the Enter/drag DID number field.
6. Click OK.
If you selected multiple EE monitors, SIDs, or PIDs, a confirmation dialog box displays,
reminding you that one graph will be opened for each selection. Click Yes to display the
graphs.
7. When you close a graph, a dialog box asks if you want to save the monitor. If you click OK, the
monitor is saved, and will persist if the switch is rebooted.