Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

142 Web Tools Administrator’s Guide
53-1001194-01
Zoning management
9
Deleting zones
Use the following procedure to delete a zone.
1. Open the Zone Administration window as described on page 133.
2. Click the Zone tab.
3. Select the zone you want to delete from the Name menu and click Delete.
4. On the confirmation dialog box, click Yes.
The selected zone is deleted from the Zone Admin buffer. At this point you can either save your
changes or save and enable your changes.
5. Click Zoning Actions > Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 145.
Creating and populating traffic isolation zones
A traffic isolation zone (TI zone) is a special zone that creates a dedicated path for a specific traffic
flow. When a TI zone is activated, inter-switch traffic from a zone member is directed to E_Ports
that are included in the TI zone. Traffic from outside the TI zone is excluded. A maximum of 255 TI
zones can be configured. LSAN devices can be added only in TI zones created in the backbone
switch.
Use the following procedure to create and populate a TI zone.
1. Open the Zone Administration window as described on page 133.
2. Under Zoning Modes, select Traffic Isolation Zones.
The Traffic Isolation Zones view displays.
3. Click New on the menu bar.
The Add TI Zone dialog box displays.
4. Expand the Member Selection List to view the nested elements.
5. Select an element in the Member Selection List that you want to include in your zone. The Add
Member button becomes active.
6. Click Add Member to add the zone member.
The selected member is moved to the Zone Members window.
7. Optional: Repeat steps 7 and 8 to add more elements to your TI zone.
8. When you are finished, click OK.
You return to the Traffic Isolations Zones view.
9. Click Apply to save the traffic isolation zone configuration.