Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)
144 Web Tools Administrator’s Guide
53-1001194-01
Zone configuration and zoning database management
9
3. Click the Zone Config tab and click New Zone Config.
4. On Create New Config, type a name for the new configuration and click OK.
The new configuration appears in the Name list.
5. Expand the Member Selection List to view the nested elements.
The choices available in the list depend on the selection made in the View menu.
6. Select an element in the Member Selection List that you want to include in your configuration.
The Add Member button becomes active.
7. C li ck Add Member to add configuration members.
Selected members are moved to the Config Members Window.
8. Repeat steps 6 and 7 to add more elements to your configuration.
9. Click Zoning Actions > Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 145.
Adding or removing zone configuration members
Use the following procedure to add or remove members of a zone configuration.
NOTE
You can make changes to a configuration that is currently enabled; however, changes do not appear
until you re-enable the configuration.
1. Open the Zone Administration window as described on page 133.
2. Click the Zone Config tab.
3. Select the configuration you want to modify from the Name list.
4. Click an element in the Member Selection List that you want to include in your configuration or
click an element in the Config Members that you want to delete.
5. Click Add Member to add a configuration member or Remove Member to remove a
configuration member.
6. Click Zoning Actions > Save Config to save the configuration changes.
To enable the configuration, see “Enabling zone configurations” on page 145.
Renaming zone configurations
The new name cannot exceed 64 characters and can contain alphabetic, numeric, and underscore
characters. Use the following procedure to change the name of a zone configuration.
NOTE
You cannot rename the currently enabled configuration.
1. Open the Zone Administration window as described on page 133.
2. Click the Zone Config tab.
3. Select the configuration you want to rename from the Name list and click Rename.