Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

172 Web Tools Administrator’s Guide
53-1001194-01
Disabling Access Gateway mode
12
NOTE
You cannot enable Access Gateway mode if Management Server is enabled. To disable
Management Server, enter the MsplmgmtDeactivate command.
1. Select a switch.
2. Click Switch Admin in the Manage section under Tasks.
The Switch Administration window opens.
3. Save the switch configuration.
4. Click Enable in the Access Gateway Mode section.
5. Click Apply.
6. Click Yes to restart the switch in Access Gateway mode.
Disabling Access Gateway mode
1. Select a switch.
2. Click Switch Admin in the Manage section under Tasks.
The Switch Administration window opens.
3. Save the switch configuration.
4. Click Disable in the Access Gateway Mode section.
5. Click Apply.
6. Click Yes to restart the device in native switch mode.
Viewing the Access Gateway settings
You can view the effective Access Gateway settings for the selected switch. The view can be
customized.
1. Click Access Gateway Devices in the Monitor section under Tasks.
The Access Gateway Device Display window opens.