Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

Web Tools Administrator’s Guide 179
53-1001194-01
Fabric Watch threshold configuration
13
Opening the Fabric Watch window
1. Select a switch from the Fabric Tree and log in if necessary.
2. Select Tasks > Manage > Fabric Watch.
The Fabric Watch window opens, as shown in Figure 88.
Fabric Watch threshold configuration
The Threshold Configuration tab enables you to configure event conditions. From this tab, you
configure threshold traits, alarms, and e-mail configurations.
Use the procedures in this section to configure threshold traits for all classes except for the FRU
class. Use the procedure described in “Configuring alarms for FRUs” on page 182 for the FRU
class.
Configuring threshold traits
Configure threshold traits to define a threshold for a particular class and area. You can configure
the following traits for a threshold:
• Time Base—The time base (second, minute, hour, day) for the area
• Low Boundary—The low threshold for the event-setting comparisons
• High Boundary—The high threshold for the event-setting comparisons
• Buffer Size—The size of the buffer zone used in event-setting comparisons
1. Click Fabric Watch in the Manage section of the Tasks menu.
2. Click the Threshold Configuration tab.