Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

Web Tools Administrator’s Guide 199
53-1001194-01
Setting up iSCSI Target Gateway Services
15
Configuring the IP route (optional)
1. Launch the iSCSI Target Gateway Admin module as described on page 194.
2. Select the iSCSI Port tab.
3. From the left pane, select the GbE port that to use.
4. Select the IP Routes tab.
5. Click Add.
FIGURE 96 Add IP Route dialog box
6. Enter the IP address, subnet mask, and gateway IP address, and the metric.
7. C li ck Add.
Editing the IP route
1. Open the iSCSI Target Gateway Admin as described on page 194.
2. Select the iSCSI Port tab.
3. From the left pane, select the GbE port that to use.
4. Select the IP Routes tab.
5. Click Edit.
A warning dialog box appears.
6. Click OK.
7. Enter a new value for the metric.
8. Click OK.
If you want to change a value other than the metric, you must delete this route and create another
in its place.