Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

200 Web Tools Administrator’s Guide
53-1001194-01
Setting up iSCSI Target Gateway Services
15
Creating iSCSI virtual targets
SCSI virtual target creation is done from the first pane in the iSCSI Target Gateway Admin module.
The iSCSI Virtual Target wizard provides two ways to create iSCSI targets: Create and Easy Create.
Create allows you to double check your work several times before committing the changes.
1. Open iSCSI Target Gateway Admin as described on page 194.
2. Select the Targets tab.
3. Click Create.
The VT Configuration Wizard opens.
FIGURE 97 VT Configuration Wizard
4. Enter an IQN.
The text field displays the value “iqn” and you must enter the remaining data.
5. Click Add LUNs.
6. On LUN Addition Dialog, select LUNs to add.
You must expand each unit until you get to the actual LUN.
7. C li ck Add LUN(s).
This adds the selected LUNs to your virtual target.
8. Click Next and click Finish.