Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

248 Web Tools Administrator’s Guide
53-1001194-01
IPSec over FCIP
17
Establishing an IPSec policy for an FCIP tunnel
1. Select the IPSec tab
The IPSec Policies window is displayed.
2. Select Create.
An Add Policy dialog box is displayed (Figure 122).
FIGURE 122 Add Policy (IPSec over FCIP)
3. Policy Type provides a way to toggle between IKE and IPSec Add Policy dialog boxes. Make
sure the Policy Type is set to IPSEC.
4. Assign a policy number. The Policy Number selector allows you to choose a number between 1
and 32.
5. Choose the Encryption Algorithm used in this policy. The choices are 3DES, AES-128, and
AES_256.
6. Choose an Authentication Algorithm for this policy. The choices are SHA-1, MD5, and AES-
XCBC.
The remaining three fields are grayed out. They apply only to IKE policies.
7. C li ck OK.