Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

Web Tools Administrator’s Guide 257
53-1001194-01
IPSec over management ports
17
Manually creating an SA
You can manually create a security association (SA).
1. Select the SA(Manual) tab.
2. Select Add.
The Add Manual-SA dialog box is displayed (Figure 131)
FIGURE 131 Add Manual-SA dialog box
3. Type a security parameter index number in the SPI (Hexadecimal) field. The SPI must be
manually applied when manually adding an SA.
4. Enter the IP address of the endpoint that sends the SA in the Source IP Address field.
5. Enter the IP address of the endpoint that receives the SA in the Peer IP Address field.
6. Select the protocol used to carry the transmission using the Protocol Name selector.
7. Select the Traffic Flow Direction (in or out). IPSec policies are unidirectional, and must be
applied separately to inbound and outbound flows.
- For the flow from peer to source, choose in.
- For the flow from source to peer choose out.