Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

272 Web Tools Administrator’s Guide
53-1001194-01
Displaying Request Node Identification Data (RNID)
18
3. Click Copy.
The Copy CUP Port Connectivity Configuration dialog box displays.
4. In the dialog box, type a name and description for the new configuration and click OK to save
the configuration to the target file; click Cancel to cancel copying the configuration.
The file name must be in alphanumeric characters and can contain only dashes or
underscores as special characters.
Deleting a CUP Port Connectivity Configuration
Use the following procedure to delete a saved CUP port connectivity configuration.
1. Display the CUP port connectivity configuration list.
2. Click the saved configuration from the list.
3. Click Delete.
The Delete CUP Port Connectivity Configuration confirmation dialog box displays.
4. Click Yes to delete the selected configuration; click No to cancel the deletion.
Displaying Request Node Identification Data (RNID)
Web Tools displays RNID information for the local switch, and for attached FICON devices and
FICON channel paths. RNID information for the switch displays on the switch view (see Figure 137).
FIGURE 137 Switch RNID Information