Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

4 Web Tools Administrator’s Guide
53-1001194-01
Web Tools, the EGM license, and DCFM
1
Web Tools functionality moved to DCFM
The functionality that was moved from Web Tools into DCFM is applicable to both DCFM
Professional and DCFM Enterprise. The following table details these changes.
TABLE 2 Web Tools functionality moved to DCFM
Function Web Tools 6.1.0 DCFM Comments
Add Un-Zoned
Devices
Zone Admin Configure > Zoning
Reverse Find in the Zoning dialog
provides the view of the zoned
and unzoned devices in the fabric
if all zone members are selected
for Find.
Analyze Zone
Config
Zone Admin 1 Configure > Zoning:
Reverse Find in the Zoning
dialog provides the view of
the zoned and unzoned
devices in the fabric if all
zone members are selected
for Find.
2 Device Tree and Topology:
Connected End Devices -
Custom Display from the top
level in the main frame
provides the device tree and
topology view for all the
zoned devices if all zones are
selected in the active zone
configuration.
Define Device
Alias
Zone Admin Configure > Zoning
Device
Accessibility Matrix
Zone Admin Configure > Zoning
the Compare dialog provides the
Storage-Host and Host-Storage
view in a tree representation that
is comparable to the Device
Accessibility Matrix when all
devices are selected.
Fabric Events Monitor > Fabric Events Monitor > Logs > Events
Fabric Summary Reports > Fabric Summary Monitor > Reports > Fabric
Summary Report
FCIP Tunnel
Configuration
Port Admin Module > GigE
tab
Configure > FCIP Tunnel Viewing FCIP tunnels is
still supported in Web
Tools 6.1.1, but New, Edit
Config, and delete are
only available in DCFM.
GigE Ports
Interface
Port Admin Module > GigE
tab
Configure > FCIP Tunnel
GigE Ports Route Port Admin Module > GigE
tab
Configure > FCIP Tunnel