Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

Web Tools Administrator’s Guide 63
53-1001194-01
Virtual Fabrics overview
3
Selecting a logical switch from the Switch View
You can log in to a specific logical switch, as described in Chapter 1, or you can select a logical
switch from the Switch View. If you do not log in to a specific logical switch, you are presented with
the default logical switch. Figure 29 is an example.
FIGURE 29 Default logical switch
1. To select a different logical switch, use the Logical Switch selector to select the fabric ID, as
shown in Figure 30.
A dialog box is displayed asking you to confirm your selection.
FIGURE 30 Logical switch selector
2. Click Yes to confirm.
The selected logical switch is displayed. Figure 31 shows the logical switch associated with
fabric ID 2. Note that the Logical Switch selector is relocated above the Switch View.