Brocade Web Tools Administrator's Guide v6.2.0 (53-1001194-01, April 2009)

Web Tools Administrator’s Guide 71
53-1001194-01
Admin Domain configuration maintenance
4
An info link is enabled when USB is chosen as the source of the configuration file. If you click
info
, the following information message is displayed.
8. Type the configuration file with a fully-qualified path, or select the configuration file in the
Configuration File Name field.
9. Use the Fabric ID selector to select the fabric ID of the logical switch to which the configuration
file is to downloaded. The selector will show all the virtual fabric IDs that have been defined,
the default of 128 for the physical switch, chassis level configuration, and all chassis and
switches.
10. Type the fabric ID of the logical switch in Template Fabric ID.
NOTE
If you are using a USB device, it must be connected and mounted before you upload or download.
Refer to “Uploading and downloading from USB storage” for more information.
11. Click Apply.
You can monitor the progress by watching the Upload/Download Progress bar.
Admin Domain configuration maintenance
When you log in to the switch as a physical fabric administrator and back up a configuration, all
local switch configuration parameters are saved, as well as all Admin Domain membership
information and Admin Domain zone databases.
To perform a config upload/download, you should have the admin domain of AD255 or AD0, if no
other user-defined Admin Domains exist. A config upload/download gathers all the configuration
files for the fabric, including Admin Domains and iSCSI Target Gateway information. For more
information on Admin Domains, see “Requirements for Admin Domains” on page 95.
When the configuration is backed up, one of the following scenarios is possible:
• If the current Admin Domain does not own the switch and you are logged in with any role that
allows config upload/download, the following will be saved in the config file:
• Local zone configuration
• iSCSI configuration (if any)
• No other configuration information
• If the current Admin Domain owns the switch and you are logged in with any role that allows
config upload/download, the following will be saved in the configuration file: