HP StorageWorks Fabric OS 6.0.1a release notes (AA-RWFMA-TE, June 2008)

Closed defect sum mary
Solution
Example for setting IPv6 address in the help page of ipaddrset
command needs update.
Fixed in Fabric OS 6.0.0
Discovery Domain does not show all the D D’s that are members of
DDSET when configured from usability wizard.
Fixed in Fabric OS 6.0.0
On the "Configure DD" screen, when adding a new Discovery
Domain (DD) and adding VT and VI, it also adds VT and VI from
the existing D D.
Fixed in Fabric OS 6.0.0
In "Zoneadmin
"role,whenADsareconfigured, "set default mode"
option (under
zoning actions tab) should be disabled.
Fixed in Fabric OS 6.0.0
If an active ipv4 policy has "80 accepted ; 80 denied; and 443
accepted," both http and https are disabled on the switch.
Fixed in Fabric OS 6.0.0
On a 4/256 SAN Director, Web Tools shows DHCP is on. User
cannot change IP address from Web Tools since it blocks the static
IP address change when DHCP is enabled.
Fixed in Fabric OS 6.0.0
Firmware up
grade on 400 Multi-protocol Router from Fabric OS
5.1.1b to 5.3.0_rel_bld46 results in segmentation fault message.
Fixed in Fabric OS 6.0.0
During firmwaredownload process, creating an IP interface while
BP code is still loading may result in kernal panic.
Fixed in Fabric OS 6.0.0
MIBS: Walk and Table View shows different outputs for the same
table.
Fixed in Fabric OS 6.0.0
NPIV failed to work after firmware is upgraded from pre- Fabric OS
5.1.0 to Fabric OS 5.1.0 or higher. Downgrade and up grade resolve
the problem.
Fixed in Fabric OS 6.0.0
Unexpected menu appears after Customize Repor t tabselectedin
Fabric Watch from GUI.
Fixed in Fabric OS 6.0.0
Ports did not link up on a specific 3rd party host/HBA after hosts
were rebooted. Switch not ready for F or L ports.
Fixed in Fabric OS 6.0.0
Need a command to query aptpolicy of application blades.
Fixed in Fabric OS 6.0.0
Need to update Help page for the new aptpolicy -ap command.
Fixed in Fabric OS 6.0.0
aptpolicy -ap command needs to validate command line
argument.
Fixed in Fabric OS 6.0.0
Web Tool
s: Fabric Events window cannot collect info from other
switche
s connected to the fabric.
Fixed in Fabric OS 6.0.0
Web Tools shows internal ports for embedded switch supporting an
E-Port, which is inconsistent with the CLI.
Fixed in Fabric OS 6.0.0
While configuring FCIP tunnel through FCIP wizard, the SAN
connection drop down menu shows only one option—SAN extension.
Thereshouldbetwootheroptions—"FCREdgefabric"and"FCR
backbone fabric"
Fixed in Fabric OS 6.0.0
Help/man for portcfglongdistance should be edited to include
FC10-6 information.
Fixed in Fabric OS 6.0.0
20