Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

586 Fabric OS Command Reference Manual

53-1000436-01

secPolicyFCSMove

Moves a member in the FCS policy.

Synopsis secpolicyfcsmove [from, to]

Description Use this command to move an FCS member from one position to another position in the FCS list.

Only one FCS can be moved at a time. The first FCS switch in the list that is also present in the

fabric is the Primary FCS. FCS Policy must be enabled on the switch to execute this command.

If no parameters are specified, the command becomes interactive, prompting you to supply valid

values for the operands.

If a backup FCS is moved to the first position, it becomes the primary FCS after activation.

This command can be issued in secure mode from the Primary FCS switch.It is supported in

non-secure mode for FCS policy management.

Operands This command has the following operands:

from Specify the position of the FCS switch you want to move.

to Specify the position to which you want to move the FCS switch.

Examples To move the backup FCS switch at position 2 to position 3 in the FCS list:

switch:admin> secpolicyfcsmove

Pos Primary WWN DId swName.

=================================================

1 Yes 10:00:00:60:69:10:02:18 1 switch5.

2 No 10:00:00:60:69:00:00:5a 2 switch60.

3 No 10:00:00:60:69:00:00:13 3 switch73.

Please enter position you'd like to move from : (1..3) [1] 2

Please enter position you'd like to move to : (1..3) [1] 3

____________________________________________________

DEFINED POLICY SET

FCS_POLICY

Pos Primary WWN DId swName

__________________________________________________

1 Yes 10:00:00:60:69:10:02:18 1 switch5.

2 No 10:00:00:60:69:00:00:13 3 switch73.

3 No 10:00:00:60:69:00:00:5a 2 switch60.

____________________________________________________

See Also secFabricShow, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,

secPolicyDump, secPolicyRemove, secPolicySave, secPolicyShow