Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

746 Fabric OS Command Reference Manual
53-1000436-01
ISL Trunking Commands
3
ISL Trunking Commands
The following commands are available with the purchase of a Brocade ISL Trunking license key. For
more detailed information about trunking refer to the Fabric OS Administrator’s Guide.
Advanced Performance Monitoring Commands
The following commands are available with the purchase of a Brocade Advanced Performance
Monitoring license key.
TABLE 5 Brocade Trunking Commands
Command Description
portCfgTrunkPort Configures a port for trunking.
switchCfgTrunk Configures a switch for trunking.
trunkDebug Debugs a trunk link failure.
TABLE 6 Performance Monitoring Commands
Command Description
perfAddEEMonitor Adds an end-to-end monitor to a port.
perfAddIPMonitor Adds an IP monitor to a port.
perfAddReadMonitor Adds a SCSI Read monitor to a port.
perfAddRWMonitor Adds a SCSI Read and Write monitor to a port.
perfAddSCSIMonitor Adds a SCSI traffic frame monitor to a port.
perfAddUserMonitor Adds a user-defined monitor to a port.
perfAddWriteMonitor Adds a SCSI Write monitor to a port.
perfCfgClear Clears the performance monitoring settings from flash memory.
perfCfgRestore Restores performance monitoring settings from flash memory.
perfCfgSave Saves the current performance monitoring settings to flash memory.
perfClearAlpaCrc Clears an AL_PA device CRC count by the port and AL_PA.
perfClearEEMonitor Clears statistics counters of an end-to-end (EE) monitor on a port.
perfClearFilterMonitor Clears statistics counters of a filter-based monitor.
perfDelEEMonitor Deletes an end-to-end monitor on port.