Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

3-8 Fabric OS Message Reference
Publication Number: 53-1000242-01
BL-1018
3
BL-1018
Message
Probable
Cause
Indicates that the slot has completed initializing the ports.
Recommended
Action
No action is required.
Severity INFO
BL-1019
Message
Probable
Cause
Indicates that the slot had internal ports not online and that the system is retrying to bring the ports that
failed back online.
Recommended
Action
No action is required.
Severity INFO
BL-1020
Message
Probable
Cause
Indicates that the switch has failed to initialize the ASIC chips.
Recommended
Action
Reboot or power cycle the switch.
Run the systemVerification command to verify that the switch does not have hardware problems. Refer
to the Fabric OS Command Reference for more information on this command.
If the message persists, replace the switch.
Severity CRITICAL
<timestamp>, [BL-1018], <sequence-number>,, INFO, <system-name>,
Slot <slot number> Initialization Completed
<timestamp>, [BL-1019], <sequence-number>,, INFO, <system-name>,
Slot <Slot number>, retry <Retry Number>, internal port retry
initialization, <List of internal ports retrying initialization>
<timestamp>, [BL-1020], <sequence-number>,, CRITICAL, <system-
name>, Switch timed out initializing the chips.