Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 3-13
Publication Number: 53-1000242-01
BL-1033
3
Probable
Cause
Indicates that BE/BI ports have not come ONLINE within time limit.
Recommended
Action
Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does
not have hardware problems. If the message persists, replace the blade.
Refer to the Fabric OS Command Reference for more information on the systemVerification
command.
Severity CRITICAL
BL-1033
Message
Probable
Cause
Indicates that the system timed out while waiting for disable messages from the user ports after
disabling the ports.
Recommended
Action
Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does
not have hardware problems. If the message persists, replace the blade.
Refer to the Fabric OS Command Reference for more information on the systemVerification
command.
Severity CRITICAL
BL-1034
Message
Probable
Cause
Indicates that the indicated slot has completed initializing FC ports.
Recommended
Action
No action is required.
Severity INFO
<timestamp>, [BL-1033], <sequence-number>,, CRITICAL, <system-
name>, (slot <slot number>,bitmap 0x<object control flags(bitmap)>)
No disable acknowledgment from ports (state <status of the blade>).
Disabling Slot.
<timestamp>, [BL-1034], <sequence-number>,, INFO, <system-name>,
Slot <slot number> FC Initialization Completed