Manualshelf

Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP DC SAN Director Switch 16-port 8Gb Fibre Channel Blade Option
111112113114115116117118119120
Fabric OS Message Reference 7-1
Publication Number: 53-1000242-01
Chapter
7
CER System Messages
CER-1001
Message
Probable
Cause
Indicates that the HA synchronization between the active and standby CPs is broken because there is
downlevel firmware loaded on the standby CP. The standby CP does not support the Advanced
Performance Tuning module when FICON Management Server is enabled.
Recommended
Action
Run the firmwareDownload command to upgrade the firmware on the standby CP.
You can also disable FMS on the active CP.
Severity ERROR
<timestamp>, [CER-1001], <sequence-number>,, ERROR, <system-name>,
HA Sync broken, since standby Advanced Performance Tuning module
does not support FICON Management Server (FMS).