Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

9-12 Fabric OS Message Reference
Publication Number: 53-1000242-01
EM-1043
9
Severity WAR NIN G
EM-1043
Message
Probable
Cause
Indicates that the specified FRU cannot be powered on or off.
Recommended
Action
The specified FRU is not responding to commands and should be replaced.
Severity WAR NIN G
EM-1044
Message
Probable
Cause
Indicates that the specified FRU cannot be powered on because the associated logical switch is shut
down.
Recommended
Action
Run the switchStart command on the associated logical switch.
Severity WAR NIN G
EM-1045
Message
Probable
Cause
Indicates that an automatic power adjustment is being made because of the (predicted) failure of a
power supply or the insertion or removal of a port blade. If new_state is On, a port blade is being
powered on because more power is available (either a power supply was inserted or a port blade was
removed or powered down). If new_state is Off, a port blade has been powered down because a power
supply has been faulted, because it is indicating a predicted failure. If new_state is Down (not enough
power), a newly inserted port blade was not powered on because there was not enough power available.
<timestamp>, [EM-1043], <sequence-number>,, WARNING, <system-name>,
Can't power <FRU Id> <state (on or off)>.
<timestamp>, [EM-1044], <sequence-number>,, WARNING, <system-name>,
Can't power on <FRU Id>, its logical switch is shut down
<timestamp>, [EM-1045], <sequence-number>,, WARNING, <system-name>,
<FRU Id> is being powered <new state>