Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 11-1
Publication Number: 53-1000242-01
Chapter
11
FABR System Messages
FABR-1001
Message
Probable
Cause
Indicates that the specified switch port is isolated because of a segmentation due to mismatched
configuration parameters.
Recommended
Action
Based on the segmentation reason displayed within the message, look for a possible mismatch of
relevant configuration parameters in the switches at both ends of the link.
Run the configure command to modify the appropriate switch parameters on both the local and remote
switch.
Severity WAR NIN G
FABR-1002
Message
Probable
Cause
Indicates that the fabric does not have any available multicast alias IDs to assign to the alias server.
Recommended
Action
Verify alias IDs using the fabricShow command on the principal switch.
Severity WAR NIN G
<timestamp>, [FABR-1001], <sequence-number>,, WARNING, <system-
name>, port <port number>, <segmentation reason>
<timestamp>, [FABR-1002], <sequence-number>,, WARNING, <system-
name>, fabGaid: no free multicast alias IDs