Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 11-3
Publication Number: 53-1000242-01
FABR-1005
11
FABR-1005
Message
Probable
Cause
Indicates that the application failed to send an async command for the specified port. The message
provides additional details regarding the reason for the failure and the exchange ID of the command.
This can happen if a port is about to go down.
Recommended
Action
No action is required; this message is often transitory.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
FABR-1006
Message
Probable
Cause
Indicates that the Fabric OS is trying to free or deallocate memory space that has already been
deallocated. This message is rare and usually indicates a problem with the Fabric OS.
Recommended
Action
In case of severe memory corruption, the system might recover by performing an automatic failover.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
FABR-1007
Message
Probable
Cause
Indicates that a failure occurred when deallocating an information unit. This message is rare and usually
indicates a problem with the Fabric OS.
Recommended
Action
In case of severe memory corruption, the system might recover by performing an automatic failover.
<timestamp>, [FABR-1005], <sequence-number>,, WARNING, <system-
name>, <command sent>: port <port number>: status 0x<reason for
failure> (<description of failure reason>) xid = 0x<exchange ID of
command>
<timestamp>, [FABR-1006], <sequence-number>,, WARNING, <system-
name>, Node free error, caller: <error description>
<timestamp>, [FABR-1007], <sequence-number>,, WARNING, <system-
name>, IU free error, caller: <function attempting to de-allocate
IU>