Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

12-4 Fabric OS Message Reference
Publication Number: 53-1000242-01
FABS-1010
12
FABS-1010
Message
Probable
Cause
Indicates that the Fabric OS detected an unknown event type. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
Severity WAR NIN G
FABS-1011
Message
Probable
Cause
An unrecognized state code was used in an internal Fabric OS message for a FRU.
Recommended
Action
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR
FABS-1012
Message
Probable
Cause
A FRU could not be transitioned to the requested state. This is usually an internal Fabric OS problem.
Recommended
Action
Reboot or power-cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.
Severity ERROR
<timestamp>, [FABS-1010], <sequence-number>,, WARNING, <system-
name>, <Function name>: Wrong media_event <Event number>
<timestamp>, [FABS-1011], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:Invalid input state 0x<Input
state code>
<timestamp>, [FABS-1012], <sequence-number>,, ERROR, <system-name>,
<Method name>[<Method tag number>]:FRU state transition failed.
Current state 0x<Current state of FRU> Requested state 0x<Requested
new state of FRU> err 0x<Error code>