Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

Fabric OS Message Reference 19-3
Publication Number: 53-1000242-01
FICU-1005
19
FICU-1005
Message
Probable
Cause
Indicates that the initialization of a module within the FICON-CUP daemon failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Command Reference for more information on this command.
Severity ERROR
FICU-1006
Message
Probable
Cause
Indicates that the path with the specified PID and channel image ID lost allegiance to a FICON-CUP
device.
Recommended
Action
Check if the FICON channel corresponding to the PID in the message is functioning correctly.
Severity WAR NIN G
FICU-1007
Message
Probable
Cause
Indicates that memory resources are low. This might be a transient problem.
Recommended
Action
If the message persists, check the memory usage on the switch, using the memShow command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WAR NIN G
<timestamp>, [FICU-1005], <sequence-number>,, ERROR, <system-name>,
Failed to initialize <module> rc = <error>
<timestamp>, [FICU-1006], <sequence-number>,, WARNING, <system-
name>, Control Device Allegiance Reset (Logical Path:
0x<PID>:0x<channel image ID>)
<timestamp>, [FICU-1007], <sequence-number>,, WARNING, <system-
name>, <function name>: Failed to allocate memory while performing
<message>