Brocade Fabric OS Message Reference Guide (53-1000242-01, November 2006)

19-4 Fabric OS Message Reference
Publication Number: 53-1000242-01
FICU-1008
19
FICU-1008
Message
Probable
Cause
Indicates that the specified port(s) were disabled when FICON Management Server mode (fmsMode)
was enabled. This is due to port address conflict or port address being reserved for CUP management
port
Recommended
Action
No action is required.
Severity WAR NIN G
FICU-1009
Message
Probable
Cause
Indicates that the frame filtering resources required to enable FICON Management Server mode
(fmsMode) were not available on some of the ports.
Recommended
Action
Use the perfDelFilterMonitor command to delete the filter-based performance monitors used on all
ports to free up the resources.
Severity WAR NIN G
FICU-1010
Message
Probable
Cause
Indicates that the FICON Management Server mode (fmsMode) was not enabled because the specified
port which has an address conflict with the CUP management port is in use.
Recommended
Action
Use the portDisable command to disable the specified port to avoid the port address conflict.
Severity WAR NIN G
<timestamp>, [FICU-1008], <sequence-number>,, WARNING, <system-
name>, FMS mode has been enabled. Port(s):<port number(s)> have
been disabled due to port address conflict.
<timestamp>, [FICU-1009], <sequence-number>,, WARNING, <system-
name>, FMS Mode enable failed due to insufficient frame filtering
resources on some ports
<timestamp>, [FICU-1010], <sequence-number>,, WARNING, <system-
name>, FMS Mode enable failed due to address conflict with port
<port number>